General Lifting Equipments
Mumbai, Maharashtra
GST No. 27ACNPL4431B1ZU
08048086217 83% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Industrial Gearboxes
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Industrial |
| Power | 0.18 kW-3.7 kW |
| Material | Cast Iron |
| Gear Type | Planetary |
| Packaging Type | Carton Box |
| Output Torque | 350Nm |
| Input Speed | 1500 rpm |
| Orientation | Vertical |
WORM GEARBOX
Worm gearboxes are having cast iron gear case, worm shaft is of Alloy Steel, duly hardened and tempered. The worm wheel is made of Chill Cast Phosphorous Bronze.
Lubrication:
Lubrication in Worm gearbox is by splash of oil from the sump. Thus, no special care is required except for the occasional oil topping of the oil to the required level. An oil filler cum breather plug is provided along with the drain plug and level plug. Oil seals of appropriate size are provided on all input and output shafts. For very low input speed of below 50 RPM, and heavy loads in sizes above 350 mm, forced lubrication is required
Worm gearboxes have input shafts that are positioned perpendicular to the output shafts.
Ratio : 5/1 to 4900/1
Center Distances : 40 mm to 400 mm
Single stage / Double stage
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Industrial |
| Material | MS |
| Gear Type | Vertical |
| Mounting | Flange |
| Input Speed | 1440 RPM |
| Torque | 1000 Nm |
GEARED MOTOR
Helical Inline Gear Motor
Bevel Helical 90 degree angled Gear Motor
Parallel Shaft, shaft mounted Helical Gear motor
Input Power :0.18 KW to 90 KW
Transmission Ratio : 1.4-250
Mounting Structure : Foot & Flange Mounted
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Industrial |
| Orientation | Horizontal |
| Material | MS |
| Gear Type | Helical |
| Mounting | Foot |
| Country of Origin | Made in India |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Industrial |
| Power | 0.25 HP to 5.0 HP |
| Material | MS |
| Gearing Arrangement Type | Worm |
| Country of Origin | Made in India |
WORM GEARBOX
Worm gearboxes are having cast iron gear case, worm shaft is of Alloy Steel, duly hardened and tempered. The worm wheel is made of Chill Cast Phosphorous Bronze.
Lubrication:
Lubrication in Worm gearbox is by splash of oil from the sump. Thus, no special care is required except for the occasional oil topping of the oil to the required level. An oil filler cum breather plug is provided along with the drain plug and level plug. Oil seals of appropriate size are provided on all input and output shafts. For very low input speed of below 50 RPM, and heavy loads in sizes above 350 mm, forced lubrication is required
Worm gearboxes have input shafts that are positioned perpendicular to the output shafts.
Ratio : 5/1 to 4900/1
Center Distances : 40 mm to 400 mm
Single stage / Double stage
| Usage/Application | Industrial |
| Material | MS |
| Gear Type | Helical |
| Mounting | Foot |
| Country of Origin | Made in India |
EXTRUDER GEARBOX
Single Screw Extruder Drive
Available Model: 90 / 110 / 125 / 140 / 160 / 180 / 200 / 225 / 250 / 280 / 315 / 355
Rigit Design
Available in: Single stage & two stage Extruder duty Helical Gearboxes
Ratio: 6:1 To 22:1
Case: Graded cast Iron
Gears: Made from high graded alloy steel, harden and precision profile ground to meet higher standard
Spherical thrust roller bearing
Vertical models are also available
| Minimum Order Quantity | 1 Piece |
| Brand | ANY REPUTED MAKE |
| Usage/Application | Industrial |
| Material | CASTING AND ALLOY STEEL |
| Gear Type | Helical |
| Country of Origin | Made in India |
EXTRUDER GEARBOX
Single Screw Extruder Drive
Available Model: 90 / 110 / 125 / 140 / 160 / 180 / 200 / 225 / 250 / 280 / 315 / 355
Rigit Design
Available in: Single stage & two stage Extruder duty Helical Gearboxes
Ratio: 6:1 To 22:1
Case: Graded cast Iron
Gears: Made from high graded alloy steel, harden and precision profile ground to meet higher standard
Spherical thrust roller bearing
Vertical models are also available
*Your information is safe with us.
| Brand | PowerHorse |
| Input Speed | 1400 rpm |
| Output Speed | 25 - 150 rpm |
| Usage/Application | Industrial |
| Frequency | 50 Hz |
| Voltage | 240-380 V |
WORM GEARBOX
Worm gearboxes are having cast iron gear case, worm shaft is of Alloy Steel, duly hardened and tempered. The worm wheel is made of Chill Cast Phosphorous Bronze.
Lubrication:
Lubrication in Worm gearbox is by splash of oil from the sump. Thus, no special care is required except for the occasional oil topping of the oil to the required level. An oil filler cum breather plug is provided along with the drain plug and level plug. Oil seals of appropriate size are provided on all input and output shafts. For very low input speed of below 50 RPM, and heavy loads in sizes above 350 mm, forced lubrication is required
Worm gearboxes have input shafts that are positioned perpendicular to the output shafts.
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Industrial |
| Material | MS |
| Packaging Type | Box |
| Type | Helical |
| Orientation | Vertical |
| Mounting | Foot |
| Condition | Used |
| Power Rating | 4.7 kW to 1500 kW |
EXTRUDER GEARBOX
Single Screw Extruder Drive
Available Model: 90 / 110 / 125 / 140 / 160 / 180 / 200 / 225 / 250 / 280 / 315 / 355
Rigit Design
Available in: Single stage & two stage Extruder duty Helical Gearboxes
Ratio: 6:1 To 22:1
Case: Graded cast Iron
Gears: Made from high graded alloy steel, harden and precision profile ground to meet higher standard
Spherical thrust roller bearing
Vertical models are also available
| Usage/Application | Industrial |
| Country of Origin | Made in India |
WORM GEARBOX
Worm gearboxes are having cast iron gear case, worm shaft is of Alloy Steel, duly hardened and tempered. The worm wheel is made of Chill Cast Phosphorous Bronze.
Lubrication:
Lubrication in Worm gearbox is by splash of oil from the sump. Thus, no special care is required except for the occasional oil topping of the oil to the required level. An oil filler cum breather plug is provided along with the drain plug and level plug. Oil seals of appropriate size are provided on all input and output shafts. For very low input speed of below 50 RPM, and heavy loads in sizes above 350 mm, forced lubrication is required
Worm gearboxes have input shafts that are positioned perpendicular to the output shafts.
Ratio : 5/1 to 4900/1
Center Distances : 40 mm to 400 mm
Single stage / Double stage
*Your information is safe with us.
| Material | pb4 |
| Usage/Application | Industrial |
| Wheel Diameter | 100 mm |
| Hardness | 40-45 HRC |
| Packaging Type | Box |
| Tolerance | 0.01 mm |
WORM GEARBOX
Worm gearboxes are having cast iron gear case, worm shaft is of Alloy Steel, duly hardened and tempered. The worm wheel is made of Chill Cast Phosphorous Bronze.
Lubrication:
Lubrication in Worm gearbox is by splash of oil from the sump. Thus, no special care is required except for the occasional oil topping of the oil to the required level. An oil filler cum breather plug is provided along with the drain plug and level plug. Oil seals of appropriate size are provided on all input and output shafts. For very low input speed of below 50 RPM, and heavy loads in sizes above 350 mm, forced lubrication is required
Worm gearboxes have input shafts that are positioned perpendicular to the output shafts.
Ratio : 5/1 to 4900/1
Center Distances : 40 mm to 400 mm
Single stage / Double stage
| Minimum Order Quantity | 1 None |
| Voltage | 415 |
| Phase | Three Phase |
| Usage/Application | Industrial |
| Country of Origin | Made in India |
Helical Inline Gear Motor
Bevel Helical 90 degree angled Gear Motor
Parallel Shaft, shaft mounted Helical Gear motor
Input Power :0.18 KW to 90 KW
Transmission Ratio : 1.4-250
Mounting Structure : Foot & Flange Mounted
| Usage/Application | POWERTRANSMISSION |
| Material | Mild Steel |
WORM GEARBOX
Worm gearboxes are having cast iron gear case, worm shaft is of Alloy Steel, duly hardened and tempered. The worm wheel is made of Chill Cast Phosphorous Bronze.
Lubrication:
Lubrication in Worm gearbox is by splash of oil from the sump. Thus, no special care is required except for the occasional oil topping of the oil to the required level. An oil filler cum breather plug is provided along with the drain plug and level plug. Oil seals of appropriate size are provided on all input and output shafts. For very low input speed of below 50 RPM, and heavy loads in sizes above 350 mm, forced lubrication is required
Worm gearboxes have input shafts that are positioned perpendicular to the output shafts.