General Lifting Equipments
Mumbai, Maharashtra
GST No. 27ACNPL4431B1ZU
Call 08048086217 80% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Used Gearboxes
| Material | Mild Steel |
| Power Consumption | 15 hp |
| Phase | 3 Phase |
| Voltage | 380 V |
| Power Source | Electric |
| Condition | Second Hand |
WORM GEARBOX
Worm gearboxes are having cast iron gear case, worm shaft is of Alloy Steel, duly hardened and tempered. The worm wheel is made of Chill Cast Phosphorous Bronze.
Lubrication:
Lubrication in Worm gearbox is by splash of oil from the sump. Thus, no special care is required except for the occasional oil topping of the oil to the required level. An oil filler cum breather plug is provided along with the drain plug and level plug. Oil seals of appropriate size are provided on all input and output shafts. For very low input speed of below 50 RPM, and heavy loads in sizes above 350 mm, forced lubrication is required
Worm gearboxes have input shafts that are positioned perpendicular to the output shafts.
Ratio : 5/1 to 4900/1
Center Distances : 40 mm to 400 mm
Single stage / Double stage
| Voltage | 240 V |
| Brand | RADICON |
| Usage/Application | Industrial |
| Power | 15-20 HP |
| Material | MS |
| Gear Type | Worm |
| Gearbox Type | Reduction Gearbox |
| Condition | Used |
WORM GEARBOX
Worm gearboxes are having cast iron gear case, worm shaft is of Alloy Steel, duly hardened and tempered. The worm wheel is made of Chill Cast Phosphorous Bronze.
Lubrication:
Lubrication in Worm gearbox is by splash of oil from the sump. Thus, no special care is required except for the occasional oil topping of the oil to the required level. An oil filler cum breather plug is provided along with the drain plug and level plug. Oil seals of appropriate size are provided on all input and output shafts. For very low input speed of below 50 RPM, and heavy loads in sizes above 350 mm, forced lubrication is required
Worm gearboxes have input shafts that are positioned perpendicular to the output shafts.
Ratio : 5/1 to 4900/1
Center Distances : 40 mm to 400 mm
Single stage / Double stage
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Industrial |
| Type | Worm |
| Power | 10 kW |
| Orientation | Vertical |
| Mounting | Flange |
| Material Used | Cast iron and Pb4 |
| Condition | Used |
WORM GEARBOX
Worm gearboxes are having cast iron gear case, worm shaft is of Alloy Steel, duly hardened and tempered. The worm wheel is made of Chill Cast Phosphorous Bronze.
Lubrication:
Lubrication in Worm gearbox is by splash of oil from the sump. Thus, no special care is required except for the occasional oil topping of the oil to the required level. An oil filler cum breather plug is provided along with the drain plug and level plug. Oil seals of appropriate size are provided on all input and output shafts. For very low input speed of below 50 RPM, and heavy loads in sizes above 350 mm, forced lubrication is required
Worm gearboxes have input shafts that are positioned perpendicular to the output shafts.
Ratio : 5/1 to 4900/1
Center Distances : 40 mm to 400 mm
Single stage / Double stage
*Your information is safe with us.
| Usage/Application | Industrial |
| Material | Iron And Gun Metal |
| Type | Worm |
| Power (HP) | 0.25 HP TO 75 HP |
| Orientation | Horizontal |
| Input Speed | 700 RPM |
| Size | 1 Inch Center Distance To 17 Inch Center Distance |
| Condition | Used |
WORM GEARBOX
Worm gearboxes are having cast iron gear case, worm shaft is of Alloy Steel, duly hardened and tempered. The worm wheel is made of Chill Cast Phosphorous Bronze.
Lubrication:
Lubrication in Worm gearbox is by splash of oil from the sump. Thus, no special care is required except for the occasional oil topping of the oil to the required level. An oil filler cum breather plug is provided along with the drain plug and level plug. Oil seals of appropriate size are provided on all input and output shafts. For very low input speed of below 50 RPM, and heavy loads in sizes above 350 mm, forced lubrication is required
Worm gearboxes have input shafts that are positioned perpendicular to the output shafts.
Ratio : 5/1 to 4900/1
Center Distances : 40 mm to 400 mm
Single stage / Double stage
| Voltage | 380 V |
| Power | 1 hp to 100 hp |
| Orientation | Horizontal |
| Type | Helical |
| Mounting | Foot |
| Condition | Second hand |
| Usage/Application | Conveyors, Crystallizers, Wind mills, etc. |
| Material | MS |
| Power | 1 HP To 100 HP |
| Orientation | Vertical |
| Type | Planetary |
| Mounting | Flange, Foot |
| Finishing | Color Coated |
| Power Range | Upto 1500 kW |
| Reduction Ratio Range | Upto 15000/1 Ratio |
| Condition | Used |
*Your information is safe with us.
| Usage/Application | Industrial |
| Material | MS |
| Type | Helical |
| Power (HP) | 1-500 HP |
| Application | Conveyors, Cranes, Mixers, Crushers, Larger Ball Mills, Coal Pulverizing Mills, Agitators, Aerators |
| Power Range | Upto 5500 kW |
| Reduction Ratio Range | Upto 650/1 |
| Condition | Used |
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Industrial |
| Power | 50 HP |
| Material | MS |
| Gear Type | Helical |
| Condition | Used |
WORM GEARBOX
Worm gearboxes are having cast iron gear case, worm shaft is of Alloy Steel, duly hardened and tempered. The worm wheel is made of Chill Cast Phosphorous Bronze.
Lubrication:
Lubrication in Worm gearbox is by splash of oil from the sump. Thus, no special care is required except for the occasional oil topping of the oil to the required level. An oil filler cum breather plug is provided along with the drain plug and level plug. Oil seals of appropriate size are provided on all input and output shafts. For very low input speed of below 50 RPM, and heavy loads in sizes above 350 mm, forced lubrication is required
Worm gearboxes have input shafts that are positioned perpendicular to the output shafts.
Ratio : 5/1 to 4900/1
Center Distances : 40 mm to 400 mm
Single stage / Double stage
| Brand | Shanthi |
| Usage/Application | Industrial |
| Gear Type | Helical |
| Country of Origin | Made in India |
Helical GearboxBrand : ShanthiSize : 125Ratio : 22.4Input shaft : 28mmOutput Shaft : 60mm
*Your information is safe with us.
WORM GEARBOX
Worm gearboxes are having cast iron gear case, worm shaft is of Alloy Steel, duly hardened and tempered. The worm wheel is made of Chill Cast Phosphorous Bronze.
Lubrication:
Lubrication in Worm gearbox is by splash of oil from the sump. Thus, no special care is required except for the occasional oil topping of the oil to the required level. An oil filler cum breather plug is provided along with the drain plug and level plug. Oil seals of appropriate size are provided on all input and output shafts. For very low input speed of below 50 RPM, and heavy loads in sizes above 350 mm, forced lubrication is required
Worm gearboxes have input shafts that are positioned perpendicular to the output shafts.
EXTRUDER GEARBOX
Single Screw Extruder Drive
Available Model: 90 / 110 / 125 / 140 / 160 / 180 / 200 / 225 / 250 / 280 / 315 / 355
Rigit Design
Available in: Single stage & two stage Extruder duty Helical Gearboxes
Ratio: 6:1 To 22:1
Case: Graded cast Iron
Gears: Made from high graded alloy steel, harden and precision profile ground to meet higher standard
Spherical thrust roller bearing
Vertical models are also available